Softphone Presence Status: Online, Away, Busy, DND

Tom Reed · Updated 19 November 2026
Softphone presence status shows whether a colleague is free before you call. The states are Online, Away, Busy, Do Not Disturb and On The Phone, and they update in real time. Presence tells you who is available, while BLF lamps show line activity. Small teams use both to cut down on interrupted calls and missed hand-offs.
This guide is for office managers and IT admins who want their team to use presence properly. It explains each status, how presence differs from a busy lamp field, where it helps most, and a short checklist for setting it up.
What is presence status on a softphone?
Presence status is a small indicator next to a person's name that tells everyone else whether they can take a call or reply to a message right now. Instead of ringing a colleague and finding out they are in the middle of something, you look first and choose the best way to reach them.
SessionTalk's business softphone includes real-time presence, so you can see your team's availability at a glance before you call or message. It runs in one app across Windows, Mac, iOS and Android, alongside voice, video and messaging. Under the hood it supports SIP and messaging-layer presence subscriptions, which is how the status of other people reaches your screen.
What do Online, Away, Busy, Do Not Disturb and On The Phone mean?
There are five states. The table below sets out what each one should mean for the people who see it. Agree the wording with your team so everybody reads the same status the same way.
| State | Meaning for colleagues |
|---|---|
| Online | Available to call or message |
| Away | Not at their device right now |
| Busy | Working; interrupt only if needed |
| Do Not Disturb | Please don't call or message |
| On The Phone | Already on a call |

On The Phone is also shown as On Call in some places, and it tells you the person is already speaking with someone. Busy and Do Not Disturb are different on purpose. Busy says "I am working, interrupt me only if it matters", while Do Not Disturb says "please leave me alone for now". Teams that treat them as the same lose the useful middle ground.
How is presence different from a BLF lamp?
Presence and busy lamp field answer different questions. Presence describes a person: are they online, away, busy or on a call. A busy lamp field, usually shortened to BLF, shows activity on a line or extension, so you can keep an eye on the lines you care about.
Receptionists often rely on BLF to watch key extensions, while everyone else relies on presence to decide whether to message or call. You do not have to pick one. SessionTalk's softphone supports BLF monitoring as well as presence. Our guide to the busy lamp field on a softphone covers the lamp side in detail, so this article stays focused on presence states.
When does presence help a small team?
Presence earns its keep wherever one person's availability affects another person's work. A few common cases:
- Reception: check whether the person you are about to transfer to is free before you put the caller through
- Hand-offs: see who is on a call, so a colleague does not ring in while the conversation is still going
- Shared desks: spot whether someone is at their device or has stepped away
- Remote staff: tell office colleagues you are online even though they cannot see you at your desk
Presence also pairs well with chat. If a colleague shows Busy, a quick message is often kinder than a call, and they can reply when they are ready. The softphone brings voice, video and chat into one app, and our article on SIP instant messaging in a softphone explains how messaging fits alongside calling. You can also read more about messaging in SessionTalk.

How do you set up presence for your team?
Keep it simple. Presence works best when everybody understands it, so the people part matters as much as the settings. Work through this short checklist with your team:
- Agree what Busy and Do Not Disturb mean in your team
- Make sure everyone uses the same softphone app
- Ask reception and hand-off roles to check presence before transferring
- Add BLF monitoring for key extensions
- Review the rules after a week and adjust them
Write the agreed meanings somewhere everyone can find them, such as a pinned team message or a page in your onboarding pack. New starters will pick up the habit faster when the rules are written down, and managers can point to the page if someone ignores a Do Not Disturb status.
Pair it with a hosted PBX
Pair it with a hosted PBX so extensions and presence work across the whole team. When everyone sits on the same phone system, each person has an extension, the team directory is shared, and presence reflects who is actually free. For the wider picture of how phone systems handle status and chat, read our guide to phone system presence and team chat, or start with the basics in what a PBX phone system is.
FAQ
What does Do Not Disturb mean on a softphone?
Do Not Disturb tells your colleagues not to call or message you. It is a request to the rest of the team, so agree internally what is urgent enough to break it. It is different from Busy, which signals that you are working and can be interrupted if something really needs your attention.
What is the difference between presence and BLF?
Presence is a person's availability, such as Online, Away, Busy, Do Not Disturb or On The Phone. BLF shows the activity of a line or extension, so you can watch the lines that matter. Presence helps you decide whether to contact someone, and BLF helps you keep track of line activity.
Does presence work on mobile and desktop?
SessionTalk's softphone covers Windows, Mac, iOS and Android, and it includes presence alongside voice, video and messaging. That means colleagues can see a person's status whichever device they use. Check the softphones page for the current list of features and platforms before you plan a rollout.
What does On The Phone mean?
On The Phone means the person is already on a call. It is sometimes shown as On Call. Use it as a cue not to ring them again straight away. Send a message instead, or wait until the status changes back to Online, then call when they are free to talk.
Do I need a PBX for presence?
Presence and BLF work best with a shared PBX, because everyone is on the same phone system and the same team directory. A hosted PBX gives each person an extension and keeps the status of the whole team in one place, so reception and colleagues always see the same picture.


